Cotton/Cotton-Knit Work Gloves
Cleaning Steps
Prepare warm water (30–40°C) and dissolve an appropriate amount of mild laundry detergent.
Gently rub the gloves; turn them inside out to clean the interior, paying special attention to dirt on the fingertips.
Rinse thoroughly with clean water and gently squeeze out excess moisture.
Precautions
Do not use hot water, as this may cause the cotton fibers to shrink or lose their shape.
Soaking in a solution with a small amount of salt or white vinegar can help prevent color fading.
Avoid direct sunlight; air-dry in a cool, well-ventilated area. Once 90% dry, they can be ironed at a low temperature to restore their shape.
Nitrile/Rubber/Latex Work Gloves
Cleaning Steps
For silicone oil stains on nitrile gloves, use a non-ionic neutral detergent and soak in 45–50°C water for at least 30 minutes.
Rinse with RO/DI water; perform at least five rinse cycles, with each cycle lasting 5–10 minutes.
For general daily dirt, simply wash the inside and outside of the gloves with soapy water.
Precautions
Ensure they are thoroughly air-dried after washing; a small amount of talcum powder can be applied to the interior and exterior to prevent sticking.
Avoid prolonged contact with acids, alkalis, or oils when using natural rubber gloves to prevent aging and cracking.
